Delphi — Install Rocker Arm Assembly

Cylinder Head and Valves IMPORTANT: Thoroughly inspect intake and exhaust valve bridges (A) for proper seating on valve stems (B) from both sides of engine. Also, make sure that push tubes (C) are properly seated in top of valve bridges. 02 020 65 Use a flashlight and carefully check each bridge (for proper seating on valve stems) from both sides of the engine. Lift up on each bridge to verify proper seating. Valve bridges that are not properly seated on valve stems will result in major engine failure. RG9743 –UN–04DEC98 Before installing rocker arm cover, make sure that all EUI wires are positioned so that rocker arm will not contact wires when engine is running.

Inspect Bridges and Push Tubes 5. Install rocker arm cover. (See REMOVE AND INSTALL ROCKER ARM COVER, earlier in this group.) A—Valve Bridge B—Valve Stems C—Push Tube Continued on next page RG,RG34710,97 –19–01NOV00–6/9 CTM100 (06APR04) 02-020-65 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=137