Delphi — Disassemble Piston/Rod Assembly and Clean Piston

CTM100 (06APR04) 02-030-21 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=161 Cylinder Block, Liners, Pistons, and Rods 3. Remove piston rings (B) using the JDG967 Piston Ring Expander (A). Discard rings. CAUTION: Always follow manufacturer’s instructions, and safety steps exactly. –UN–09DEC97 4. Clean piston ring grooves using a piston ring groove cleaning tool. IMPORTANT: When washing pistons, always use a RG8367 stiff bristle brush—NOT A WIRE BRUSH—to loosen carbon residue. Removing Piston Rings DO NOT bead blast ring groove areas. A—JDG967 Piston Ring Expander B—Piston Ring 5. Clean pistons by any of the following methods: • Immersion-Solvent “D-Part”. • Hydra-Jet Rinse Gun.

• Hot water with liquid detergent soap. If cleaning with hot water and liquid detergent, soak pistons in a 50 percent solution of liquid household detergent and hot water for 30 to 60 minutes. Use a stiff bristle brush—NOT A WIRE BRUSH—to loosen carbon residue. Dry with compressed air. RG,RG34710,114 –19–01NOV00–2/2 02 030 21