CTM100 (06APR04) 02-030-37 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=177 Cylinder Block, Liners, Pistons, and Rods Install Piston Pin Bushing 1. Lubricate connecting rod bore with clean engine oil. IMPORTANT: Do not use power tools to install bushing. 2. Assemble JDE98-10 Bushing Remover/Installer (B) with JDE98-9 Pilot (C). Install new bushing (E) onto driver. Lubricate OD of bushing. Install and lubricate STD36104 Forcing Screw threads (D). 3. Assemble JDE98-6 Pilot (F) onto driver. 4. Engage forcing screw heads with threads in JDE98-8 Cup (A) and install new bushing. IMPORTANT:
Boring the connecting rod bushing should be done ONLY by experienced personnel on equipment capable of maintaining bushing finish specification. –UN–09DEC97 5. Precision bore new bushing to specification to obtain pin-to-bushing clearance. Remove all debris from boring operation. RG8421 Specification Installing Rod Piston Pin Bushing Piston Pin Bushing (After Boring)—ID................................................................ 50.805—50.830 mm A—JDE98-8 Cup1 (2.0002—2.0012 in.) B—JDE98-10 Bushing Remover/Installer1 Piston Pin—OD.........................................................
50.772—50.787 mm C—JDE98-9 Pilot1 (1.9989—1.9995 in.) D—STD36104 Forcing Screw1 Piston Pin-to-Bushing—Clearance................................ 0.017—0.059 mm E—Bushing (0.0007—0.0023 in.) F—JDE98-6 Pilot1 1 From JDE98A Connecting Rod Bushing Service Set. RG,RG34710,125 –19–30SEP97–1/1 02 030 37