Cylinder Block, Liners, Pistons, and Rods NOTE: JDG1145 Cylinder Liner Service Set (D) can be used with lapping compound, as shown, to lap liner flange to block counterbore. 02 030 4. Inspect liner support flange (C) for burrs. If burrs are present, use respective liner with lapping compound to remove burrs. 40 RG7142 –UN–05DEC97 5. Measure liner flange counterbore depth (A) in block (B) and flange thickness on liner. Compare with specification given below. Specification Cylinder Liner Flange Counterbore—Depth in Block 9.461—9.512 mm (0.3725—0.3745 in.) ........................................
Liner Counterbore Depth Cylinder Liner Flange—Thickness 9.525—9.575 mm (0.3750—0.3770 in.) ................................ 6. Carefully inspect block for cracks or any other physical damage. If a cracked block is suspected, pressure-test the block. A procedure for pressure testing is outlined in FOS (Fundamentals of Service) Manual—Engines. Replace block if there is evidence of a crack or physical damage. RG10340 –UN–09SEP99 Lap Liner Flange A—Liner Flange Counterbore Depth B—Block C—Liner Support Flange D—JDG1145 Liner Service Set RG,RG34710,127 –19–09SEP99–2/2 CTM100 (06APR04) 02-030-40 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=180