Delphi — Measure Cylinder Block

Cylinder Block, Liners, Pistons, and Rods IMPORTANT: The centerline of the main bearing bore-to-top deck of cylinder block MUST be 429.92–430.07 mm (16.926– 16.932 in.). If not, replace cylinder block. 02 030 42 3. Measure cylinder liner bores in block and compare to the following specifications. Cylinder Block Bore for Seating Liner—Specification Liner Flange Counterbore—ID 153.57—153.77 mm (6.046—6.054 in.) .................................. Upper Block Bore for Seating Liner—ID 145.845—145.895 mm (5.7419—5.7439 in.) ................................................................

Lower Block Bore for Seating Liner—ID 140.465—140.515 mm (5.5301—5.5321 in.) ................................................................ RG,RG34710,128 –19–03AUG99–2/2 CTM100 (06APR04) 02-030-42 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=182