Delphi — Install Cylinder Liner O-Rings and Packings

Cylinder Block, Liners, Pistons, and Rods Install Cylinder Liner O-Rings and Packings NOTE: Piston and liner sets differ between engines. DO NOT mix piston and liner sets. See parts catalog for correct applications. 02 030 44 IMPORTANT: DO NOT use oil on cylinder liner packing or O-rings. Oil can cause the red packing to swell, which squeezes liner and could possibly cause a scored piston. 1. Pour AR54749 Soap Lubricant into a suitable container. RG3826 –UN–04DEC97 2. Dip new packings and O-rings in soap before installation. Do not leave packings or O-rings in soap to soak. 3. Install the black viton O-ring (A) in the lower O-ring groove of the cylinder block (C).

Liner O-Rings and Packing 4. Install the red silicone O-ring (B) in the upper O-ring groove of the cylinder block. A—Black Viton O-Ring B—Red Silicone O-Ring C—Cylinder Block RG,RG34710,130 –19–01NOV00–1/2 5. Turn cylinder liner (B) upside-down and install the neoprene square packing (A) over outside of liner. 6. Slide packing down firmly against second shoulder on the liner. NOTE: Make sure the packing is not twisted. RG3827 –UN–04DEC97 7. Coat the liner packings, sealing area of the cylinder liner, and cylinder block O-rings with liquid soap.

Install Square Packing on Liner A—Neoprene Square Packing B—Cylinder Liner CTM100 (06APR04) 02-030-44 P OWER T ECH 10.5 L & 12.5 L Diesel Engines RG,RG34710,130 –19–01NOV00–2/2 040604 PN=184