Delphi — Install Cylinder Liners

CTM100 (06APR04) 02-030-45 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=185 Cylinder Block, Liners, Pistons, and Rods Install Cylinder Liners NOTE: Piston and liner sets differ between engines. DO NOT mix piston and liner sets. See parts catalog for correct applications. –UN–04DEC97 IMPORTANT: Install cylinder liner into same cylinder block bore as removed. DO NOT scuff the packing across the upper bore. RG2772 When liner ODs are pitted or eroded and are under one-half the liner Installing Liner thickness, rotate liners 90° from their removed position. Rotate the pitted section of the liner toward either the front or rear of the engine.

If liners are not pitted or eroded, rotation will not be necessary. Install liners with the identifying mark (stamped on flange), toward the front of the engine. 1. Carefully place the cylinder liner, with packing installed, into the cylinder block bore. NOTE: A resistance will be felt when cylinder liner is aligned in pilot bore. 2. Using only the pressure of both palms, the cylinder liner should drop to a point nearly flush at the upper flange of the cylinder liner and cylinder block. Continued on next page RG,RG34710,131 –19–01NOV00–1/2 02 030 45