Delphi — Remove Crankshaft

CTM100 (06APR04) 02-040-19 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=215 Crankshaft, Main Bearings, and Flywheel Remove Crankshaft 1. Remove timing gear cover. (See REMOVE TIMING GEAR COVER, earlier in this group.) 2. Remove flywheel. (See REMOVE FLYWHEEL, earlier –UN–09DEC97 in this group.) 3. Remove flywheel housing. (See REMOVE AND INSTALL FLYWHEEL HOUSING, earlier in this group.) RG8409A 4. Remove rear oil seal housing. (See REMOVE REAR CRANKSHAFT OIL SEAL AND HOUSING Removing Rod Caps ASSEMBLY, earlier in this group.) A—Bearings 5. Remove all six piston spray jets to avoid damage. (See REMOVE AND INSTALL PISTON SPRAY JETS in Group 030.) 6. Remove main bearings 2 through 6.

(See REMOVE CRANKSHAFT MAIN BEARINGS, earlier in this group.) 7. Rotate crankshaft using the JDG820 Flywheel Turning Tool until connecting rod caps can be removed easily. You will be able to remove two rod caps at each position. 8. Remove all connecting rod caps with bearings (A), then remove No. 1 and 7 main bearing caps and bearings. (See REMOVE PISTONS AND CONNECTING RODS in Group 030.) Continued on next page RG,RG34710,164 –19–13AUG99–1/2 02 040 19