Delphi — Remove, Inspect, and Install Oil Pressure Relief Valve (If Equipped)

CTM100 (06APR04) 02-060-5 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=273 Lubrication System Remove, Inspect, and Install Oil Pressure Relief Valve (If Equipped) NOTE: Refer to OIL FILTER AND OIL CONDITIONING HOUSING ASSEMBLY, earlier in this group, for illustrated location of valves. –UN–06DEC97 Oil pressure relief valve is in same location on oil cooler cover/valve housing on remote filter applications. RG8245D 1. Remove oil pressure relief valve assembly (B) from oil filter housing (G). Removing Oil Pressure Relief Valve B—Oil Pressure Relief Valve Assembly 2. Clean all parts with a brass or copper wire brush and G—Oil Filter Housing solvent. Dry with compressed air. 3.

Inspect valve and valve bore for damage. Replace if necessary. 4. Check valve spring for proper compression. Replace if not within specification. Specification Oil Pressure Relief Valve Spring—Free Length.................................................... 79.0 mm (3.11 in.) Working Load @ 196—222 N (44—50 lb-force)........................................................... 65.0 mm (2.56 in.) 5. Dip all parts in clean engine oil. Insert valve and spring assembly in housing. 6. Install plug using a new O-ring and tighten securely. RG,RG34710,211 –19–13AUG99–1/1 02 060 5