Delphi — Remove, Clean, and Inspect Engine Oil Cooler

Lubrication System Remove, Clean, and Inspect Engine Oil Cooler NOTE: Guide pins may be used as an aid for removing and installing oil filter housing. 02 060 6 1. Remove oil filter and valve housing (shown removed). (See REMOVE OIL FILTER AND VALVE HOUSING/OIL COOLER COVER AND VALVE HOUSING, earlier in this group.) RG8248A –UN–06DEC97 2. Install two guide pins (A) as shown (if desired). Remove two hex socket head cap screws (B) and remove oil cooler housing (C) with oil cooler (D). Removing Oil Cooler and Housing Assembly 3. Remove and discard oil cooler-to-cylinder block gasket.

A—Guide Pins B—Hex Socket Head Cap Screws C—Oil Cooler Housing D—Oil Cooler RG8249B –UN–06DEC97 Continued on next page Oil Cooler and Housing Assembly Removed RG,RG34710,212 –19–12AUG99–1/3 CTM100 (06APR04) 02-060-6 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=274