Delphi — Install Oil Cooler/Oil Filter Valve Housing Assembly or Oil Cooler Cover/Valve Housing Assembly

Lubrication System 11. If removed, apply LOCTITE 242 Thread Lock and Sealer to oil pressure sending unit. Install sending unit and tighten securely. 02 060 8 LOCTITE is a registered trademark of Loctite Corp. RG,RG34710,212 –19–12AUG99–3/3 Install Oil Cooler/Oil Filter Valve Housing Assembly or Oil Cooler Cover/Valve Housing Assembly NOTE: Standard filter/valve housing assembly shown. Procedure for remote filter applications is similar. RG8249A –UN–06DEC97 1. Remove all gasket material from cylinder block, oil cooler housing, and oil filter/valve housing. All sealing surfaces must be clean and free of oil. NOTE: Use guide pins as an assembly aid if desired.

Installing Oil Cooler and Housing Assembly 2. Install oil cooler and housing assembly (A) using a new gasket. Position oil cooler housing-to-coolant pump hose on coolant pump outlet elbow. 3. Install two hex socket head cap screws (B) and tighten to specifications. RG8248B –UN–06DEC97 Specification Oil Cooler Housing-to-Block Cap Screws—Torque 68 (50 lb-ft) .............................................................. A—Oil Cooler and Housing Assembly B—Hex Socket Head Cap Screws Oil Cooler and Housing Assembly Installed Continued on next page RG,RG34710,213 –19–24SEP02–1/2 CTM100 (06APR04) 02-060-8 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=276