Lubrication System Remove and Install Oil Pickup Tube 1. Remove engine oil pan. (See REMOVE ENGINE OIL PAN earlier in this group.) 02 060 NOTE: On engine option code 1903, oil pickup tube is mounted on the oil pan with two cap screws. 14 RG8122 –UN–20NOV97 2. Remove three cap screws securing pickup tube to cylinder block and remove tube assembly with gasket. 3. Clean pickup tube and screen completely with solvent. Dry with compressed air. Oil Pickup Tube A—Pickup Tube 4. Inspect pickup screen for damage or holes. Inspect tube for weld breaks, bends, or any other damage. Replace as necessary. 5. Install pickup tube assembly to cylinder block using a new gasket.
Tighten cap screws to specifications. Specification Oil Pickup Tube-to-Block Cap Screws—Torque 35 (26 lb-ft) .............................................................. Oil Pickup Tube-to-Oil Pan Cap Screws—Torque 25 (18 lb-ft) .............................................................. RG,RG34710,218 –19–13AUG99–1/1 CTM100 (06APR04) 02-060-14 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=282