CTM100 (06APR04) 02-070-5 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=289 Cooling System To install fixed fan drive/camshaft gear access cover assembly, see INSTALL TIMING GEAR COVER in Group 040. RG,RG34710,224 –19–17SEP02–5/5 02 070 5 Inspect and Check Belt Tensioner Spring Tension Checking Lower Tensioner Spring Tension A belt tension gauge will not give an accurate measure of –UN–10DEC97 the belt tension when automatic spring tensioner is used. Measure tensioner spring tension using a torque wrench and procedure outlined below: RG8728 1. Release tension on belt using a long-handle 3/4-in. breaker bar in tension arm. Remove belt from pulleys. Marking Lower Belt Tensioner 2.
Release tension on tension arm and remove breaker bar. 3. Put a mark (A) on swing arm of tensioner as shown. 4. Measure 25 mm (1.0 in.) from first mark (A) and put a second mark (B) on tensioner mounting base. –UN–10DEC97 5. Rotate the swing arm using a torque wrench until marks (A and B) are aligned. RG8729 6. Record torque wrench measurement and compare with specification below. Replace tensioner assembly as Testing Lower Tensioner required. A—Mark on Swing Arm Specification B—Mark on Tensioner Base Belt Tensioner Lower Spring— Tension............................................................. 81—99 N•m (60—73 lb-ft) Continued on next page RG,RG34710,225 –19–30SEP97–1/2