TROUBLESHOOTING [108] Error code [108] (Overheating of engine coolant) Circuit diagram related to engine coolant temperature sensor PC130-7 20-311 (1) User code Error code Trouble Overheating of engine coolant (Monitor panel system) – 108 Contents of trouble • The signal circuit of the engine coolant temperature sensor inputs 99 o or higher temperature while the engine is running. Action of monitor pane • None in particular. l Problem that appears on machine • If the machine is operated as it is, the engine may be seized. Related information • If the engine coolant temperature monitor of the monitor panel flashes while the engine is running, this error code is recorded.
• The input state (ON/OFF) from the engine coolant temperature sensor can be checked with the moni- toring function. (Code: 041, by 10 mV) Possible cause and standard value in norma state Cause Overheating of engine 1 (When system is normal) Defective engine coolant 2 temperature sensor (Inter- nal short circuit) s l Short circuit with chassis ground in wiring harness 3 (Contact with ground cir- cuit) 4 Defective monitor panel Standard value in normal state/Remarks on troubleshooting The engine may have overheated. Find the cause and check the engine for damage, and then repair. aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch.
E05 (male) Engine coolant temperature Resistance Between (1) and (2) 10 – 100 °C 3.5k – 90 kz Min. 1 Mz Between (2) and chassis ground aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. Between P02 (female) (1) – E05 (female) (2) wiring harness and chassis ground Resistance Min. 1 Mz aPrepare with starting switch OFF, then carry out troubleshooting with- out turning starting switch. P02 Engine coolant temperature Resistance Between (1) and (13) 10 – 100 °C 3.5k – 90 kz Min. 1 Mz Between (1) and chassis ground