Komatsu — TROUBLESHOOTING

TROUBLESHOOTING H-2 H-2 Engine speed lowers extremely or engine stalls PC130-7 20-507 (1) Trouble • Engine speed lowers extremely or engine stalls. Related information • Carry out the troubleshooting in working mode A. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective adjustment or malfunction of main relief valve aPrepare with engine stopped, then run engine at high idling and carry out troubleshooting.

Control levers Main relief pressure Arm-IN circuit relieved 33.6 – 37.0 MPa {343 – 378 kg/cm2} If the oil pressure does not become normal after adjustment, the main relief valve may have a malfunction or a defect in it. Check the main relief valve directly. 2 Defective adjustment or malfunction of PC valve aPrepare with engine stopped, then run engine at high idling and carry out troubleshooting. Measured oil pressure Measurement conditions Oil pressure ratio Pump discharge pressure Swing lock switch: LOCK Arm-IN circuit relieved 1 PC valve output pressure 0.6 (3/5) If the oil pressure does not become normal after adjustment, the PC valve may have a malfunction or a defect in it.

Check the PC valve directly. 3 Defective adjustment or malfunction of LS valve aPrepare with engine stopped, then run engine at high idling and carry out troubleshooting. Measured oil pressure Oil pressure ratio All levers in neutral Either track shoe driven idle (Full stroke) Pump discharge pressure Almost same pressure 1 LS valve output pressure 0.6 (3/5) If the oil pressure does not become normal after adjustment, the LS valve may have a malfunction or a defect in it. Check the LS valve directly. 4 Clogging of orifice or filter in serve devices The orifices or filters in the pump servo devices may be clogged. Check them directly.

5 Malfunction servo piston The servo piston may have a malfunction. Check it directly.