Komatsu — TROUBLESHOOTING

TROUBLESHOOTING H-10 H-10 Work equipment does not move singly PC130-7 20-513 (1) Trouble (1) Boom does not move singly. (2) Arm does not move singly. (3) Bucket does not move singly. Related information • Carry out the troubleshooting in working mode A. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Malfunction of PPC valve aPrepare with engine stopped, then run engine at high idling and carry out troubleshooting.

Work equipment control lever PPC valve output pressure Neutral 0 MPa {0 kg/cm2} Operated 2.84 – 3.43 MPa {29 – 35 kg/cm2} 2 Malfunction of control valve (spool) The spool of the control valve may have a malfunction. Check it directly.