Komatsu — TROUBLESHOOTING

TROUBLESHOOTING H-11 H-11 Hydraulic drift of work equipment is large 20-514 PC130-7 (1) Trouble (1) Hydraulic drift of boom is large. Related information • Carry out the troubleshooting in working mode A. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective boom cylinder (cylinder unit) aPrepare with engine stopped, then run engine at high idling and carry out troubleshooting. Boom cylinder Leakage from cylinder Relieved in RAISE position 15 cc/min 2 Defective seal of boom cyl- inder (lock valve) The seal of the lock valve of the boom cylinder may be defective. Check it directly.

Trouble (2) Hydraulic drift of arm is large. Related information • Carry out the troubleshooting in working mode A. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective arm cylinder (cyl- inder unit) aPrepare with engine stopped, then run engine at high idling and carry out troubleshooting. Arm cylinder Leakage from cylinder Relieved in IN position 15 cc/min 2 Defective seal of arm con- trol lever (spool) The seal of the arm control valve spool may be defective. Check it directly. 3 Defective seal of arm con- trol lever (suction valve) The seal of the suction valve of the arm control valve may be defective.

Check it directly. 4 Defective seal of central- ized safety-suction valve The seal of the centralized safety-suction valve of the control valve may defective. Check it directly. (A trouble of the centralized safety-suction valve have bad effects on bucket.) Trouble (3) Hydraulic drift of bucket is large. Related information • Carry out the troubleshooting in working mode A. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective bucket cylinder (cylinder unit) aPrepare with engine stopped, then run engine at high idling and carry out troubleshooting.

Bucket cylinder Leakage from cylinder Relieved in CURL position 15 cc/min 2 Defective seal of bucket control valve (spool) The seal of the bucket control valve spool may be defective. Check it directly. 3 Defective seal of bucket control valve (suction valve) The seal of the suction valve of the bucket control valve may be defec- tive. Check it directly. 4 Defective seal of central- ized safety-suction valve The seal of the centralized safety-suction valve of the control valve may defective. Check it directly. (A trouble of the centralized safety-suction valve have bad effects on arm.)