Komatsu — TROUBLESHOOTING

TROUBLESHOOTING S-3 S-3 Engine does not pick-up smoothly (Follow-up is poor) General causes why engine does not pick up smoothly PC130-7 20-611 (1) Insufficient intake of air Insufficient supply of fuel Improper condition of fuel injction Improper fuel used Causes Clogged air cleaner element Clogged fuel filter, strainer Clogged feed pump strainer Clogged injection nozzle, defective spray Seized injection pump plunger Worn piston ring, cylinder liner Seized turbocharger, interference Improper valve clearance Clogged air breather hole in fuel tank cap Clogged, leaking fuel piping Defective contact of valve and valve seat Questions Check items Confirm recent repair history Degree of use of machine Operated for long period Replacement of filters has not been carried out according to Operation Manual Non-specified fuel is being used Engine oil must be added more frequently Engine pick-up suddenly became poor Rust and water are found when fuel tank is drained Dust indicator lamp is red Noise of interference is heard from around turbocharger Color of exhaust gas Blue under light load Black Clanging sound is heard from around cylinder head Mud is stuck to fuel tank cap There is leakage from fuel piping High idling speed under no load is normal, but speed suddenly drops when load is applied There is hunting from engine (rotation is irregular) When exhaust manifold is touched immediately after starting engine, temperature of some cylinders is low Blow-by gas is excessive Troubleshooting When air cleaner element is inspected directly, it is found to be clogged When fuel filter, strainer are inspected directly, they are found to be clogged When feed pump strainer is inspected directly, it is found to be clogged Speed does not change when operation of certain cylinders is stopped When control rack is pushed, it is found to be heavy, or does not return When compression pressure is measured, it is found to be low When turbocharger is rotated by hand, it is found to be heavy When valve clearance is checked directly, it is found to be outside standard value When fuel tank cap is inspected directly, it is found to be clogged When feed pump is operated, operation is too light or too heavy Remedy Clean Clean Clean Correct Replace Replace Replace Adjust Clean Correct Replace