Komatsu — TROUBLESHOOTING

TROUBLESHOOTING S-5 S-5 Engine does not rotate smoothly (Hunting) General causes why engine does not rotate smoothly PC130-7 20-613 (1) Air in fuel system Defective governor mechanism Defective electric governor mechanism engine with electric governor) a If hunting stops when electric governor rod is disconnected, carry out troubleshooting for the chassis.

Causes Defective operation of governor evitcefeD tnemtsujda fo ronrevog Defective operation of control rack Low idling speed is too low Insufficient fuel in tank Clogged feed pump strainer Clogged fuel filter, strainer Clogged, air in circuit between fuel tank and feed pump Clogged, air in circuit between feed pump and nozzle Clogged air breather hole in fuel tank Check items Questions Confirm recent repair history Degree of use of machine Operated for long period Condition of hunting Occurs at a certain speed range Occurs at low idling Occurs even when speed is raised Occurs on slopes Replacement of filters has not been carried out according to Operation Manual Fuel tank is found to be empty Rust, water are found when fuel tank is drained Leakage from fuel piping When feed pump is operated, 1) No response, light, return is quick 2) No response, light, return is normal Engine speed sometimes rises too far Engine is sometimes difficult to stop Seal on injection pump has come off Troubleshooting When governor lever is moved it is found to be stiff When injection pump is tested, governor is found to be improperly adjusted When control rack is pushed, it is found to be heavy, or does not return When fuel tank cap is inspected directly, it is found to be clogged When feed pump strainer is inspected directly, it is found to be clogged When fuel filter, strainer are inspected directly, they are found to be clogged Remedy Adjust Adjust Adjust Adjust Add Clean Clean Correct Correct Clean