Komatsu — 20-201--.pdf

TESTING AND ADJUSTING TESTING AND ADJUSTING AIR CONDITIONER COMPRESSOR BELT TENSION TESTING AND ADJUSTING AIR CONDITIONER COMPRESSOR BELT TENSION ADJUSTING a If the deflection of the belt is abnormal, adjust it according to the following procedure. 1. Loosen compressor bracket mounting bolts (1) and (2). TESTING 1. Open the engine hood and remove the belt cover from above the air conditioner compressor. 2. Adjust the belt tension by moving compressor (3) and bracket (4) together. a Use a bar, etc. to move the bracket (Do not push the compressor directly with a bar, etc.) 2.

Press the intermediate point of the belt between the fan pulley and alternator pulley with a finger and measure deflection "a" of the belt. Force to press belt: Approx. 58.8 N {6 kg} Deflection (a): 6 – 10 mm 3. Tighten mounting bolts (2) and (1). a Check breakage of the pulleys, wear of the V-grooves, and contact of the belts and V- grooves. a If a belt is lengthened to the adjustment limit, cut, or cracked, replace it with new one. 4. After finishing adjustment, return the covers. a If a V-belt is replaced, adjust its tension again after 1 operating hour. 20-118 PC130-7 (1)