Komatsu — 20-201--.pdf

TESTING AND ADJUSTING MEASURING SOLENOID VALVE OUTPUT PRESSURE 6. After finishing measurement, remove the mea- suring instruments and return the removed parts. Operation table of 2-stage relief solenoid valve Operation table of swing holding brake solenoid valve Operation table of travel speed brake solenoid valve Operation table of PPC pressure lock solenoid valve 20-134 PC130-7 (1) Operating condition Operation One-touch power maximizing switch: ON (8.5-sec timer) ON Tr avel signal Swing lock switch Other than above condition OFF Operating condition Operation Work equipment, swing, and travel signals Any one is turned ON ON Swing holding brake release switch:

RELEASE (Upper) position Other than above condition OFF Operating condition Operation Travel speed switch: Lo OFF Auto shift function operates during run at Hi Engine speed: Below 1,500 rpm Pump pressure: Above 30.4 MPa {310 kg/cm2} Overheat prevention function operates during run at Hi Hydraulic oil temperature: Above 95°C Other than above condition ON Operating condition Operation Safety lock lever LOCK position OFF FREE position ON