Komatsu — 20-201--.pdf

TESTING AND ADJUSTING TESTING PARTS WHICH CAUSE HYDRAULIC DRIFT OF WORK EQUIPMENT 3. Testing PPC valve While the pressure in the accumulator is high, set the safety lock lever in the LOCK/FREE posi- tion and measure the lowering distance. a Operate the control lever while the starting switch is in the ON position. a If the pressure in the accumulator is lost, run the engine for about 10 seconds to heighten the pressure in the accumulator. a If there is a difference in the lowering dis- tance between the LOCK position and FREE position, the PPC valve is defective (it has an internal defect). 20-138 PC130-7 (1)