Komatsu — 20-201--.pdf

TESTING AND ADJUSTING MEASURING OIL LEAKAGE 5. Measuring oil leakage from travel motor 1) Run the engine and raise the engine oil tem- perature to 45 – 55°C, and then remove the travel motor cover. 2) Run the engine and lock the travel system. k Put pin [1] between the sprocket and track frame to lock the travel system securely. 3) Disconnect drain hose (5) of the travel motor and block the hose side with a plug. a Use the following part to block the hose side. 07376-50422 (Plug No. 04) 4) Run the engine at high idling, relieve the travel circuit, and measure the oil leakage. k Wrong operation of the lever can cause an accident. Accordingly, make signs and checks securely.

a Measure the oil leakage for 1 minute after 30 seconds since relieving is started. a Measure several times, moving the motor a little (changing the position of the valve plate and cylinder and that of the cylinder and piston) each time. 5) After finishing measurement, return the removed parts. PC130-7 20-141 (1)