Komatsu — REPLACE FUEL FILTER CARTRIDGE

. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL FILTER CARTRIDGE WARNING Prepare a filter wrench 3. Clean the filter holder. Cap (A) acts to prevent the entry of dirt or dust into the filter cartridge. 4 - 54 EVERY 1000 HOURS SER Maintenance for every 50, 100, 250 and 500 hours service should be carried out at the sa I mmediately after the engine is s topped, all parts are at high temperature, so do not replace the filt Wait for the engine to cool down T he inside of fuel piping system of the engine is under high-pressure when the engine is running.

When replacing the filter, wait for at least 30 seconds after the engine stops to let the internal pressure go down before repla Do not bring any fire or spark clo Be careful when opening the air bleed plug at the fuel filter head and the air bleeder of the supply pump. The system is still u nder pressure and fuel may spu rt out. NOTICE Genuine Komatsu fuel filter cartr idges use a special filter that has highly efficient filtering ability. When replacing the filter c artridge, always use a genuine Komatsu part. T he common rail fuel injection s ystem used on this machine consists of more precise parts than the conventional injection p I s ump and nozzle.

f any part other than a genuine K omatsu filter cartridge is used, dust or dirt may get in and cause p roblems with the injection ystem. Always avoid using sub stitute parts. When carrying out inspection or maintenance of the fuel system, pay more attention than normal t o the entry of dirt. If dirt is s tuck to any part, use fuel to was h it off completely. 1. Set the container to catch th 2. Using a filter wrench, turn fil on remove it. NOTICE When filling the filter cartridge with f cap Cap (A) fitted. (A) acts to prevent the entry of 4. Fill the filter cartridge with cl 5. (B) in the new filter cartridge Coat the packing surface of 6. Remove filter cartridge cap