Komatsu — AIR CONDITIONER, HANDLING

. OPERATION EXPLANATION OF COMPONENTS REMARK CHECK COMPRESSOR BELT TENSION AND REFRIGERANT (GAS) LEVEL 3 - 87 PROCEDURE FOR REPLACING RE Replace the receiv er once every 2 year Aft er replacing the receiver, add compre ssor oil. Turn the re ceiver at an angle and measure the oi l remainin g inside the receiver, then add the same amoun t of oil (Denso Oil 6 ) to fill the r The replaceme nt interval may becom e shorter dependi ng on t he co nditions du ring u se.

I f the receiver i s used when the moi sture absorption lim it of t he de siccan bee circuit may bec ome blocked and cau se the compressor to break do the refrigerant PRECAUTIONS WHEN REPLACING REC I f the receiver i s left for more than moisture in the air be bsorbed, and t his will reduce the life of the desiccant. If you remove the blind c over, connect t he piping quickly, vacuate the sy stem and fill with refri When removing revent oil from low pressure side If th e compressor belt is loose, or the re frigerant level is lo w, cooling is not carrie d out efficiently.

For details, see "W CLEANING AIR FILTER If th e air filter for th e FRESH or RECIRC air intake becom es clogged, t he cooling or heating capacity will d rop. To prevent this, cl ean the air filter with c ompressed air onc e a week. 22)". For details of the c leaning method, see "WHEN REQUIRE D (PAGE 4-