. OPERATION EXPLANATION OF COMPONENTS EFFECTIVE USE OF AIR CONDITIONER When it is Desired to Cool Inside of Cab Quickly inside the cab. 3 - 88 If the machine is le ft in the sun in the middle of sum mer, the temperature inside th e cab may become extreme ly high. If this happens an d it is desired to cool the cab q uickly, first open all the doors and windows to remove all the hot air, then turn the a After starting the e ngine, press auto switch (5) and use temperature setting switc h (3) to set the temperature t o 18.0.
Run the engine at a slightly higher speed for 2 or 3 minutes, then close the doo When the tempera ture inside the cab goes down , adjust to the desired tempera When Window is M In the rainy season , when the humidity inside the c ab is high, if the windows mist u p, run the air conditioner to r emove the mist. When th e outside air is extremely hum id, if the temperature inside th e cab is too low, the outside of the glass may mist up .
If this happens, adjust the set temperature or stop the air co nditioner to adjust the temperature Action when not Using Air Conditioner At times of the yea r when the air conditioner is no t used, run the air conditioner f or several minutes with the engine at low speed once conditioner) a month to maintain the lubricating oil film on all parts of the compressor. (Running in of air In winter, when the temperature inside the cab is l ow, the air conditioner may not work. If this happens , use a heater to raise the tempe rature inside the cab and run t he air conditioner. NOTICE When running the air conditioner, always start with t he engine running at low speed.
N ever start the air conditioner w hen the engine is running at high speed. It will cause failure of the air conditioner. If water gets into t he control panel or sunlight sensor , it may lead to unexpected failure, be careful not to let water get o n these parts. In addition, never bring any flame near these parts. For the auto funct ion of the air conditioner to work pr operly, always keep the sunlight s ensor clean and do not leave a nything around the sunlig ht sensor that may interfere with it s sensor function.