Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING 1. Put blade on the ground and stop the engine. Wait for 5 ground, too. NOTICE add oil. Doing so may lead to REMARK an angle, move it to a level 3 - 99 When remo ving the oil filler cap, oil ma y spurt out, so stop t he engine and wait fo r the oil temperature to go d own, then turn the cap slowly to release the internal pressure before re moving the cap. If oil has be en added to above the H ma rk, stop the engine a nd wait for the hydraul ic oil to cool down. Then rem ove drain plug (P), lo osen drain valve (1), a nd drain the before checking oil level. Oil level should be between d L in sight gauge (G).

chine is equipped with a r ipper, put ripper po int on the If damage to the oil pressure circuit and spo 2. If the lev el is below the L mark, a dd oil through oil fill er (F). 3. After ad ding oil, be sure to screw on the oil filler cap and lock it with th When inspe cting, if the machine is at