. OPERATION OPERATION drain dust indicator (1). (PAGE 4-25)". to judge the condition. 3 - 98 CHECK DAMPER CASE OIL LE 1. Remove dipstick (G), and 2. Fully insert dipstick (G) into 3. The oil level should be bet ween the H and L marks on di pstick (G). If t he oil is below the L mark , add oil through the dipstick h older 4. If the oil is above the H m ark, drain the excess oil from plug. After draining the oil, check the oil level again. REMARK engine stopped. Check the oil level with the When checking the oil level , if the machine is at an angle , move it to a horizontal positio CHECK BRAKE PEDAL TRAVE Drive the machine, depress th e brake pedal, and check tha t the CHECK DUST INDICATOR 1.
Check for the yellow piston overlapping the red zone (A) on the 2. If the yellow piston is over lapping the red zone (A), clean or iately. d of cleaning the element, see PLACE AIR CLEANER ELEMENT replace the element immed For details of the metho "CHECK, CLEAN AND RE 3. After checking, cleaning, a nd replacing, press the knob o f dus indicator (1) to return the y ellow piston to its original position. In environments where th e rubber deteriorates quickly or the surface becomes dama ged (in direct sunlight, dusty areas etc.), replace before it be comes dirty and it becomes d ifficul