. OPERATION OPERATION CHECK OIL LEVEL IN POWER TRAIN CASE, ADD OIL 3 - 97 (Including t ransmission ca se, t orqu e converter case, a nd bevel gear 1. Start th e engine and r un at idling for 5 minutes, the n check the oil level with the COL D sid e of d ipstick (G) Remov e dipstick (G), and wipe the oil off w ith a clo 2. Fully in sert dipstick (G ) into fille r pipe, then remove 3. The oil level should be between the H and L marks on dipstick (G). If the oi l level is below the L mark, add oil t hrough oil filler port (F). (A) Col d oil temperatu (B) Hot oil temperatur