Komatsu — STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION lamp (3) after approx. 12 seconds, 10. When the engine starts, release the key in starting switch (2). The key will return automatically to the ON position (B). REMARK Immediately after starting the engine, run the engine at idling, and do not operate the accelerator pedal or work equipment during this time. Guideline for idling time Cold weather: At least 15 seconds When first starting engine after changing oil or replacing engine oil filter: 20 seconds 3 - 117 8. Keep in his condition goes out. (Pre-heating lamp goe s out.) until engine re-heating pilot and the 9.

When preheatin g pilot lamp (3) goes off, turn the key of ignition switch (2) to the START po sition (C) to crank the engine. The t ime that preheating pilo t lam p ( 3) tays on changes according the as hown in the able below Ambient temperature Pre-heat time 0°C to -10°C (32°F to 14°F) 0 to 15 seconds -10°C to -20°C (14°F to -4°F) 15 to 30 seconds -20°C to -30°C (-4°F to -22°F) 30 to 45 seconds -30°C to (-22°F to) 45 seconds