Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE OUTLINES OF SERVICE 4 - 6 FUEL To prevent the moisture in the a ir from condensing and forming water i nside the fuel tank, always fill the fuel tank after completing the day's work . strument, and if fuel containing water or dirt is used, it cannot work properly. mpurities get in when storing or adding fuel. or the temperature in the Operation and Maintenance Manual. The fuel pump is a precision in strument, and if fuel containing water o r dirt is used, it cannot work p roperly.

Be extremely careful not to let i mpurities get in when storing or adding Always use the fuel specified f or the temperature in the Operation an d Maintenanc e Manual If the fuel is used at tempera °C (5°F), the fuel will solidify If the fuel is used at tempera result in problems such as a If the fuel is used at tempera tures lower than the specified temperat ure (particular ly at temperatur es below -15 . If the fuel is used at tempera tures higher than the specified temper ature, the visc osity will drop, a nd this may drop in output. Before starting the engine, or w hen 10 minutes have passed after addi ng fuel, drain t he sediment an d water f rom the fuel tank.

If the engine runs out of fuel, or if the filters have been replaced, it is n ecessary to b leed the air fro m the circuit. If there is any foreign material i n the fuel tank, wash the tank and fuel system. NOTICE Always use diesel oil for the fuel. To ensure good fuel consumption cha racteristics and exhaust gas characteristics , the engine mo unted on this ma chine use s an electronically controlled high-pressur e fuel injection device. This device requires high precision parts and lubrica tion, so i f low viscosity fuel with low lubricating abil ity is used, the durability may drop markedl y. COOLANT AND WATER FOR DILUTION unction of preventing corrosion as well as preventing freezing.

ng is not an issue, the use of antifreeze coolant is essential. d with Komatsu Supercoolant (AF-NAC). Komatsu Supercoolant (AF-NAC) has The coolant has the important f unction of preventing corrosion as wel l as preventin g freezin Even in the areas where freezi ng is not an issue, the use of antifreez e coolant is es sential. Komatsu machines are supplie d with Komatsu Supercoolant (AF-NA C). Komatsu Supercoolant (A F-NAC) has excellent anticorrosion, antifree ze and cooling propertiesand can be us ed continuou sly for 2 y ears or 4000 hours. Komatsu Supercoolant (AF-NA C) is strongly recommended wherever available. Maintenance Manual.

When using antifreeze, always observe the precautions given in the O peration and Maintenance M The Supercoolant is already dil uted with distilled water, so it is not fla mmable. With the Supercoolant (AF-NA C), the density used for the coolant diff ers according to the ambient t emperature. For details of the coolant densi ty, see "CLEAN INSIDE OF COOLING SYSTEM (P AGE 4-22)". Even in areas where it is not co nsidered necessary to prevent freezing , always use Supercoolant (A F-NAC) with a density of over 30% in order to prevent corrosion of the cooling syst Supercoolant (AF-NAC) is dil substances.

Never dilute the S If the engine overheats, wait fo r the engine to cool before adding cool If the coolant level is low, it will c ause overheating, and will also cause p roblems with corrosio n due to air entering the coolant.