. MAINTENANCE OUTLINES OF SERVICE KOWA ANALYSIS ITEMS Measurement of density of metal wear particles This uses an ICP (Inductively Coupled Plasma) analyzer to measure the density of iron, copper, and other metal wear particles in the oil. Measurement of quantity of particles This uses a PQI (Particle Quantifier Index) measurer to measure the quantity of iron particles of 5 µ m or more, enabling early detection of failures. 4 - 7 GREASE eizure and noises at the joints. t is used under heavy-duty conditions. Always use the recommended grease and Grease is used to prevent s This construction equipmen t is used under heavy-duty condition follow the change intervals a Manual.
Grease fittings not included grease. If any part becomes stiff afte nd recommended ambient temperatures given in this Operat ion and Maintenance in the maintenance section are grease fittings for overhaul, so they do not need r being used for long time, add grease. grease that is pushed out when greasing. r being used for long time, add greas Always wipe off all of the old Be particularly careful to wip wear of the rotating parts. e off the old grease in places where sand or dirt sticking in the grease would cause CARRYING OUT KOWA (K omatsu Oil Wear Analysis) The oil clinic samples the oil pe riodically and analyzes it.
This is a pr eventive maintenance se rvice, which provides early discovery of abnormal par ts and wear of the drive parts of the m achine. This then make s it possible to ensure prevention of failures and redu ction in downtime. Komatsu's long years of experi ence and rich supply of accumulated data make it possible to accurately determine the condition of your machine. This enables us to locate the problem s and to recommend suit able and timely repair methods. The oil clinic charges the cust omer only the actual costs, and provides an immediate report of the results of the analysis and recommendations for action to take.
This low-cost servi ce can save you high cos ts and inconvenience in the future, so we strongly re commend you to avail yourself of this service. Others Measurements are made of fuel in the oil, and dynamic v items such as the ratio of water in th e oil, density of the antifr eeze coolant, ratio of iscosity, enabling a highly precise di agnosis of the machine's health.