Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE OUTLINES OF SERVICE OIL SAMPLING (Mining specification, if equipped) (1): Coolant (2): Engine oil (3): Hydraulic oil (4): Power train oil Test port Manufacturer: HYDROTECHNIK Model: 2103-01-40.00 Mounting screw Size: R1/8 4 - 8 Sampling interv 250 hours: Eng 500 hours: Oth Precautions wh en sampling hat the oil is well mixed before sampling. pling at regular fixed intervals. Make sure t hat the oil is well mixed before Perform sam pling at regular fixed in tervals. Do not perfo rm sampling on rainy or windy day s when water or dust can get int If an oil sam pling coupler is equippe d, use the coupler to sample the oil.

(if equ Precautions wh Run the eng Park the ma (Parking bra The sample Run the eng ine at low idling when s ampling Park the ma chine before carrying ou t sampling ke ON, work equipment lock lever ON, ste The sample d oil is at high temperatu re, so be c areful n For further details of KOWA, please conta ct your Komatsu d STORING OIL A ND FUEL prevent any water, dirt, or other impurities from getting in. Keep indoors to prevent any water, dirt , or other i mpuritie When keeping d rum cans for a long peri od, put the drum on its side so that the filler port of the drums is at th e side to prevent mois ture from being sucked in.

If drums have t o be stored outside, cov er them wit h a wat erproof sheet or take oth er measures to protect them. To prevent any change in quality during long-term storage, be sure to use in the ord er of first in - first out (u se the oldest oil or fue l first).