. MAINTENANCE SERVICE PROCEDURE CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING outer element. CLEANING OUTER ELEMENT NOTICE Before and after cleaning the element, do not leave or keep it in direct sunlight. 1. Remove 6 holders (2), then remove cover (3) and take out outer element (4). 4 - 25 Always wear prot ective glasses, dust m ask, or o ther prote ctive equipment.
When removing t he air cleaner element from the air cleane r body, it is dangerous to pull it out by When working at high places or where t he foothold is poor , be careful not to f all because of the re action when pulling out the CHECKING If the internal yello w piston overlaps the red zone (A) on the outside diameter of dust i After cleaning, pre ndicator (1), clean th ss the reset button e air cleaner ele to reset the pisto ment. n. NOTICE Do not clean the e lement until the yellow piston in dust indicator (1) e (A) on the outer diameter.
leaned frequently before the yellow piston in dust s the red zone (A) on the outer diameter, the air cleaner Do overlaps the red zon e (A) on the outer diam If the element is c indicator (1) overlap leaned frequently bef s the red zone (A) on th will not be able to provide its expected performance and the cleaning me poor. efficiency will beco In a ddition, dirt stuc k to the element will dro p inside the inner e lement more frequently during th e cleaning operation.