Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE CLEAN AND CHECK RADIATOR FINS, OIL COOLER FINS, AFTERCOOLER FINS CLEANING BY ROTATING COOLING FAN IN REVERSE DIRECTION WARNING switch (2) to the cleaning (CLN) 4 - 37 Carry ou t this procedure if ther e is any mud o r dirt st uck to REMARK Check th e hydraulic cooler hos es. If any hose is cracked or hardened by age, replace with a new hose. Also c heck and tight en all loose hose clam When cle aning the cooling fan by t urning it in the rev erse di rection, make sure that the parking brake le ver is in the LOCK position. NOTICE ating the cooling fan in the reverse direction, be extremely careful of flying dust.

the right and left engine side covers and check that no dust and dirt are accumulated inside the engine room. When rot ating the c ooling fan in th e reverse directi on, be e xtremel Open up the right a nd left engine s ide covers and c heck th at no d ust and dirt are accumulated insid When the fan operation confirmati on lamp is lighte d and t he fan is turning in the reverse direction, t he machine does not move even if th e steering - forward and r everse - gearshif t lever i s operat ed to any of the forward, reverse a nd steering positions. This function i s designe d to protect the radiator.

When sto pping the engine when th e cooling fan is r otating in the r everse direction, first run the engin e at low idling, then st op it. The dust and dirt stuck to the ra diator and cool er can be blow n out by rotating the cooling fa n in the reverse direction. 1. Turn starting switch (1) to the "OFF" position and stop the engine. 2. Turn starting switch (1) to the "ON" position. 1. Turn starting 2. Turn starting switch (1) to t he "ON" positi 3. Turn fan rotation selector ion. posit Fan reversal lamp (3) light