. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE telling REMARK up the engine. The cooling fan begins to turn in the normal direction. CLEANING WITH COMPRESSED AIR WARNING rotating, it will cause serious personal injury. 4 - 38 REMARK Even if the fan rotation s elector switch is turned while the running, the fan does n ot change its rotation direction. Then fan rotation selec tion impossibility lamp (4) flashe 4. Start up the engine by turning engine starting switch The cooling fan beg ins to turn in the reverse direction 5. Run the engine at h Select the time for r Normal clogging: 1 Excessive clogging: unning the engine at high idle as follows according to t he condition 6.
After completing the cleaning, run the engine at low i dle for approx. 10 sec 7. Turn starting switch (1) to the "OFF" position and sto p the engine. When the cooling fan is turning for cleaning, power canno t be switched off imm ediately, ev en if the engin e starting switch key is turned to t he OFF position in order to prote ct the hydraulic circuit 8. Turn starting switch (1) to the "ON" position. rsal lamp (3) is unlighted and sta 9. Check that fan reve REMARK If dirt is caught in the ra diator fins, blow with compressed Directing compressed a ir, pressurized water, or steam directl y at your body, or using t hese and cau sing dust to fly may cause personal injury.
Always wear protective glasses, anti-dust m ask, and other protectiv e equipment. When carrying out clea ning, always stop the engine and ch eck that the fan is not r otating. If yo u touch the fan when it is NOTICE When using compressed ai r for cleaning, blow it keeping some di stance to avoid damagin g the fins. Da mage on the fins can cause water leakage and overhea ting. In a dusty job site, check the fin s every day, regardless of the mainte nance interval.