Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK OIL LEVEL IN DAMPER CASE, ADD OIL REMARK 4 - 61 1. Open the e ngine side cover on the right side of the machine. 2. Remove di pstick (G) and wipe the oil off with a cloth 3. Fully insert dipstick (G) into fill er pipe, then remove i 4. The oil sho uld be between the H and L marks on dipstick (G). f the oil is nsertion p 5. I f the oil is above the H mark, o pen inspection cover (2) i n the t t center of t he bottom face of t he power train c ase, drai n the excess oil f rom engine damper drain plug (P) (th is ca n be seen owards th e front of the machin e from the inspection window), hen check the oil level again.

Check the o il level while the en gine is stopped. If the machi ne is inclined, set it in a level positio n before c hecking t