Komatsu — EVERY 500 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE NOTICE CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL WARNING 4 - 67 10. Open the fuel v , and ru n the engine w idling until the en gine speed stabilizes . Check for any leaka ge of oil from t he filter cartridge seal surface or tra nsparent cup, and c heck for any sucking When replacing the fue l main filter cartridge, r eplace th e filter c artridge , then bleed t he air.

For details, see "REPLACE FUEL MAIN FILTER CARTRIDGE ( PAGE 4-70)" in the Ope ration an d Maintenance Manua Do not fill the fuel mai n filter cartridge with fu There is danger that oi l may spurt out under in ternal pr essure, so stan d to th e side, and gradually turn the plug to release in ternal pressure before remov 1. Place the mach ine on a horizontal pl ace. 2. Remove oil leve l plug (G) and check the oil l evel. T he oil l evel should be within a range from the bot tom edg e of th e plug hole to 20 mm (0.8 in ) down from the hol e. 3. If the oil level is still too low, add oil through oil filte r plug hole (F) until the oil o verflows.

Before removin g oil plug (F), remove all the mud an d dirt f rom around oil filler p lug (F). Be careful no t to let a ny dirt or sand get in when adding oil.