Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE (Mining specification, if equipped) If a quick coupler is installed for draining or adding power train oil, use the quick coupler. Quick coupler Manufacturer: WIGGINS Model: ON2 Mounting screw Size: 3/4-14 NPT 4 - 69 7. Loose n bolt (7), t hen d ivide into straine r (5) and magnet (6 ). Tightening torque of bolt (7): 46 to 59 Nm (4.7 to 5.9 kgm, 34 to 43 lbft) 8. Remove all dirt from strainer, then wash in clean diesel oil or flushing oil. Clean the case interior and the removed parts. 9. Install the strainers to their original position. ning torque of bolt (7): 46 to 59 N kgm, 34 8.

Remo flushin Clean the case in terio r and the remove 9. Install the straine rs to their original posi 10. After i nstalling, re plac e the element in t he power train oil filter. For d 4-62)" etails, see "EVERY 500 HOURS SERVICE (PAGE . (PAGE 11. Refill t he specifie d quantity of oil throug 12. After a dding oil, c heck that the oil is at t he specified level . For , see "CHECK OIL (PAGE 3-97)". NOTICE f the quick coupler is n ot installed securely, oil may be sent flyin g around during refill ing. For safe ty, us e the q uick coupler with the box cove r closed.