Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE EVERY 2000 HOURS SERVICE CHANGE OIL IN HYDRAULIC TANK, REPLACE HYDRAULIC OIL FILTER ELEMENT, CLEAN HYDRAULIC TANK STRAINER WARNING element. 4 - 76 Maintenance fo r every 250 , 500 a nd 100 0 hours service s hould be carried out at the same ti The oil is at hig h temperatu re immediately after the machine h as been operated. Wait for the oil to cool down before changing the oil. When removin g the oil filler cap (F) , turn it slowly t o release th e internal pressure, then remove it care Refill capacit y: 170 liters (44.91 US ga l) round securely, stop 1. 1.

Lower the b lade and ri pper on the g stop the engine and slowly turn the ca p of o il filler (F) to release cap. the internal pre ssure. Then , remo ve the cap. 2. Remove dr ain plug (1) at the botto m of the tank and loosen drain valve (2). After dr aining t he oil, tighten drain plug (1) and drain valve (2). When l oosenin g drai n valve (1), b e careful not to get oil on yourself. 3. Remove bo lts (3), then remove cover (4), an d take out element (5). 4. Clean the in side of cas e and r emove d parts and insta ll a new