Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 5. Remove bolts (6), then remove cover (7) and take out the strainer. OIL (PAGE 3-99)". (Mining specification, if equipped) If a quick coupler is installed for drainingor adding hydraulic oil, use the quick coupler. Quick coupler Manufacturer: WIGGINS Model: ON2 Mounting screw Size: 3/4-14 NPT NOTICE 4 - 77 6. Wash t he strainer i n clean diese 7. Install t 8. Add oil he strainer t through oil f o its iller original port (F) t 9. After a dding oil, check t hat the o il is at the specified level.

For see "CHEC K OIL L EVEL IN HYDRAULIC TANK, ADD If the quick c oupler is not installed securely, oil may be sent flying around during refilli ng. For safety, use the quick c oupler with th e box cover closed.