Kubota — Air Filter Maintenance

55 Inspection and Cleaning of the Air Filter Element Open the engine bonnet and remove the dust-cover. Take out only outer element, clean the element, case interior and reassemble. During reassembly, take care to install the dust-cover so that its TOP mark (arrow) faces up-wards. Do not remove the inner element. Air Filter Maintenance 3 CAUTION To avoid personal injury: Wear eye protection. IMPORTANT : Should the machine be used in extremely dusty areas, the air fi lter element must be inspected and cleaned more frequently than in the specifi ed maintenance periods. The air fi lter has a dry element, keep free from oil. Do not run the engine without the air fi lter.

Cleaning with compressed air Pressure of compressed air must be under 30 psi (205 kPa, 2.1 kgf/cm 2 ) and the cartridge should be blown clean from the inside to the outside until the dust deposits are remarkably reduced. (1) Outer element (2) Inner element (3) Dust-cover (4) Clamps IMPORTANT: If the air suction is still inadequate, or the colour of the exhaust gases is abnormal even after the cleaning, the air fi lter element must be replaced.