Kubota — Engine Oil Change (first engine oil change after 50 service hours)

56 EVERY 200 SERVICE HOURS EVERY 250 SERVICE HOURS Do all 50 and 100 hour servicing at the same time. Greasing of the Swing Bearing 1. Grease through the respective grease nipple. 2. Grease at each 90є (1.58 rad.) position of the swing frame. Do all 50 hour servicing at the same time. Engine Oil Change (First Engine Oil Change after 50 Service Hours) 3 CAUTION To avoid personal injury: First stop the engine then remove the key and wait long enough for the oil to cool down. 1. Remove the drain plug on the underside of the engine and drain all oil. 2. Re-tighten the drain plug. (1) Grease nipple (1) Drain plug 3. Fill with new oil up to the required level. (1) Oil fi lling port