MAINTENANCE SERVICE PROCEDURE CHECK OUTSIDE DIAMETER OF TRACK ROLLER 4 If the measured value comes close to the repair limit, please contact your Komatsu distributor. 1. Measure the height (dimension C) of the link tread as shown in the diagram. 2. Stop machine at position where link tread, whose size C has been measured completely, contacts roller tread. Then measure size B. 3. Calculate outside diameter of tread (size A): A = (B - C) x 2 q Standard size (A): 200 mm (7.9 in) q Repair limits: 164 mm (6.5 in) CHECK HEIGHT OF GROUSER 4 If the measured value comes close to the repair limit, please contact your Komatsu distributor.
After taking up slack in track shoes, measure height at center of shoe as shown below. q Standard height (h): 55.5 mm (2.2 in) q Repair limits: 16.5 mm (0.7 in) 4-39