5. Inspection and servicing of basic engine parts 5.6 Camshaft and tappets 5.6.1 Camshaft The camshaft is normalized and the cam and bearing surfaces are surface hardened and ground. The cams have a curve that minimized the repeated shocks on the valve seats and maximizes valve seat life. Push rod Tappet Camshaft Camshaft bushing Camshaft gear Thrust metal (1) Checking the camshaft side gap Measure the thrust gap before disassembly. As the cam gear is shrink-fitted to the cam, be careful when replacing the thrust bearing. Camshaft gear Thrust metal mm Side gap (Camshaft side gap) (2) Measure the cam height, and replace the cam if it is worn beyond the limit.
3YM30 mm Cam height Micrometer 3YM20/2YM15 mm (Cam height) 128R1 Standard Limit Camshaft side gap 0.05-0.15 0.25 Standard Limit Cam height Intake 34.135-34.265 33.89 Exhaust Standard Limit Cam height Intake 34.535-34.665 34.29 Exhaust