Yanmar — 2.2.6 Inspection every 250 hours or one year

2. Inspection and adjustment (6) Replace the fresh water coolant. Be sure to replace the fresh water every year. When the long life coolant is used of the specified type, the replacement period of two years can be obtained. Use clean soft water and be sure to add the Long Life Coolant Antifreeze (LLC) to the cooling water in order to prevent rust built up and freezing. Cooling performance drops when cooling water is contaminated with rust and scale. Even if antifreeze or antirust is added, the cooling water must be replaced periodically because the properties of the agent will degenerate. 1) Open the two cocks for fresh water and extract the fresh water. Note:

One drain cock is behind the belt cover. Remove the belt cover and open the cock. 2) Close the two cocks for fresh water. Coolant tank Drain cock for seawater Fresh water pump Seawater pump Drain plug for coolant Drain cock for coolant Drain plug for seawater 3) Remove the filler cap of the fresh water cooler by turning the cap counterclockwise 1/3 of a turn. Pressue cap Tabs Fresh water supply port Coolant tank Notches 007532-00E 4) Pour cooling water slowly into the coolant tank so that air bubbles do not develop. Pour until the water overflows from the filler port. If the filler cap is loose, hot steam and water will spout out which may cause burns. 33R1 Fresh water line Seawater line 2 2