8 G If coolant is not available, use distilled water or soft tap water instead. Do not use hard wa- ter or salt water since it is harmful to the en- gine. G If water has been used instead of coolant, re- place it with coolant as soon as possible, otherwise the cooling system will not be pro- tected against frost and corrosion. G If water has been added to the coolant, have a Yamaha dealer check the antifreeze con- tent of the coolant as soon as possible, oth- erwise the effectiveness of the coolant will G The radiator fan is automatically switched on or off according to the coolant temperature in the radiator. G If the engine overheats, see page 8-65 for fur- be reduced. ther instructions.
4. Remove the reservoir cap, add coolant or dis- tilled water to the maximum level mark, install the reservoir cap, and then install the panel. CAUTION: ECB00401 NOTE: 8-32 Coolant reservoir capacity (up to the maximum level mark): 0.17 L (0.18 US qt) (0.15 Imp.qt) 1. Coolant reservoir cap 2. Maximum level mark 3. Minimum level mark