4. Remove panel B. (See page 8-8.) 5. Remove the radiator cap. 1. Coolant drain bolt 1. Trough 8-33 Wait for the engine and radiator to cool before removing the radiator cap. You could be burned by hot fluid and steam blown out under pressure. Always place a thick rag over the cap when opening. Allow any remaining pressure to escape before completely removing the cap. 1. Place the ATV on a level surface. 2. Remove panels D and F. (See page 8-8.) 3. Place a container under the engine, and then remove the coolant drain bolt. (Use a trough or a similar object as shown to prevent coolant from spilling on the engine guard.) EBU27761 To change the coolant WARNING EWB01890 8 WARNING