8 8. After draining the coolant, thoroughly flush the cooling system with clean tap water. 9. Replace the coolant drain bolt washer if it is damaged, install the coolant drain bolt, and then tighten it to the specified torque. 10. Connect the coolant reservoir hose. 11. Pour the recommended coolant into the radia- tor until it is full. Tightening torque: Coolant drain bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 1. Coolant reservoir hose 8-34 6. Remove the coolant reservoir cap. 7. Disconnect the hose on the coolant reservoir side, and then drain the coolant from the cool- ant reservoir. 1. Radiator cap