G If water has been added to the coolant, have a Yamaha dealer check the antifreeze con- tent of the coolant as soon as possible, oth- erwise the effectiveness of the coolant will 13. Loosen the water pump air bleed bolt, without removing it, to allow all of the air to escape from the air bleed bolt hole. 14. When coolant begins to flow out of the bolt hole, tighten the water pump air bleed bolt to the specified torque. 1. Water pump air bleed bolt be reduced. 8-35 12. Pour the recommended coolant into the reser- voir to the maximum level mark, and then in- stall the reservoir cap. Antifreeze/water mixture ratio: 1:1 Recommended antifreeze:
High-quality ethylene glycol antifreeze con- taining corrosion inhibitors for aluminum en- gines Coolant quantity: Radiator capacity (including all routes): 1.99 L (2.10 US qt) (1.75 Imp.qt) Coolant reservoir capacity (up to the maxi- mum level mark): 0.17 L (0.18 US qt) (0.15 Imp.qt) G If coolant is not available, use distilled water or soft tap water instead. Do not use hard wa- ter or salt water since it is harmful to the en- gine. G If water has been used instead of coolant, re- place it with coolant as soon as possible, otherwise the cooling system will not be pro- tected against frost and corrosion. CAUTION: ECB00401 8